Installation Guide
Tools Needed:
- Hex wrenches (included)
- Allen keys (included)
- Screwdrivers (flat and Phillips)
- Pliers
- Leveling gauge
Step-by-Step Installation
- Unboxing: Carefully remove all components from packaging and verify all parts are included according to the parts list.
- Frame Assembly: Assemble the aluminum extrusion frame according to the assembly diagram, ensuring all connections are tight.
- Install Motion System: Install X, Y, and Z-axis rails and belts, ensuring proper tension and alignment.
- Mount Print Bed: Install the heated print bed and connect the heating element wires to the mainboard.
- Install Extruder: Mount the direct drive extruder assembly to the X-axis carriage and connect all cables.
- Electronics Setup: Install the mainboard, connect all motors, endstops, and heating elements in their designated ports.
- Leveling and Calibration: Perform manual bed leveling followed by automatic bed leveling using the BLTouch sensor.
- Test Print: Load filament and run a test print to verify proper operation and calibration.
Specifications
| Model | Ender 5 Plus |
| Build Volume | 350 x 350 x 400 mm |
| Print Technology | FDM (Fused Deposition Modeling) |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm (Standard) |
| Max Nozzle Temperature | 260°C |
| Max Bed Temperature | 110°C |
| Print Speed | 60-80 mm/s (Recommended) |
| Layer Resolution | 0.1 - 0.4 mm |
| Positioning Precision | X/Y: 0.012mm, Z: 0.002mm |
| Power Requirements | 110V/220V, 350W |
| Dimensions (HxWxD) | 740 x 680 x 780 mm |
| Weight | 22 kg |
| Display | 4.3-inch Color Touch Screen |
Warranty Information
- Manufacturer Warranty: 1 year on parts and labor
- Mainboard Warranty: 6 months
- Hotend Warranty: 3 months
- Community Support: Active online community and forums
For warranty service, contact Creality Customer Service at [email protected] or visit creality.com
Key Features
Large Build Volume
350x350x400mm build volume allows printing of large-scale models, prototypes, and functional parts in a single print.
Stable Cube Frame Design
The cube frame structure provides excellent stability and rigidity, reducing vibrations and improving print quality at higher speeds.
Dual Z-Axis Lead Screws
Dual Z-axis motors with trapezoidal lead screws ensure precise Z-axis movement and prevent layer shifting on tall prints.
BLTouch Auto Bed Leveling
Automatic bed leveling sensor ensures perfect first layer adhesion across the entire print surface, eliminating manual leveling hassles.
Direct Drive Extruder
Direct drive extruder provides better filament control, allowing printing of flexible filaments and reducing stringing with retractable filaments.
Silent Mainboard
TMC2208 stepper drivers provide near-silent operation while maintaining precise motor control and reducing electrical noise.
Printing Capabilities
PLA Printing
Ideal for beginners, prototypes, and decorative items with easy printing and minimal warping
ABS Printing
Suitable for functional parts requiring heat resistance and durability
PETG Printing
Perfect for mechanical parts combining strength, flexibility, and chemical resistance
TPU Printing
Flexible filament printing for gaskets, seals, and wearable items
Wood & Composite
Specialty filaments containing wood, metal, or carbon fiber particles
High-Speed Printing
Optimized profiles for faster production while maintaining quality
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Printer won't power on | Power switch, cable connection, fuse issue | Check power switch position, ensure cable is secure, check fuse |
| Poor first layer adhesion | Bed leveling, nozzle height, bed temperature | Re-level bed, adjust Z-offset, increase bed temperature |
| Extruder clicking/skipping | Nozzle clog, extruder tension, printing too fast | Clean nozzle, adjust extruder tension, reduce print speed |
| Layer shifting | Belt tension, mechanical obstruction, overheating drivers | Tighten belts, check for obstructions, ensure proper cooling |
| Stringing/oozing | Retraction settings, temperature too high | Increase retraction distance/speed, lower nozzle temperature |
| Warping/corner lifting | Bed temperature, cooling, adhesion | Increase bed temperature, use enclosure, apply adhesion aid |
Common Error Messages
- Thermal Runaway: Heating element issue - Check thermistor and heater cartridge connections
- Heating Failed: Heater not reaching temperature - Check heater cartridge and wiring
- Homing Failed: Endstop not triggered - Check endstop switches and wiring
- Filament Runout: Filament sensor triggered - Reload filament or disable sensor
- SD Card Error: Card reading issue - Reformat SD card or try different card
- Max Temp Error: Temperature exceeded safety limit - Check thermistor for damage
Manual Downloads
Current Model Manuals
Ender 5 Plus
Standard Edition Manual
Ender 5 Plus Pro
Professional Edition Guide
Ender 5 Plus S1
Sprite Extruder Edition
Ender 5 Plus BLTouch
Auto Leveling Guide
Related Models
Ender 5
Standard 220x220x300mm
Ender 5 Pro
Professional Edition
Ender 3 V2
220x220x250mm
CR-10 V3
300x300x400mm