Installation Guide
Tools Needed:
- Hex wrenches (included)
- Spanner wrench
- Screwdrivers (flat and Phillips)
- Leveling card or feeler gauge
- Pliers
Step-by-Step Installation
- Unbox and Inspect: Carefully remove all components from packaging and verify all parts are included and undamaged.
- Assemble Frame: Connect the vertical aluminum extrusions to the base frame using provided screws and brackets.
- Install Gantry: Mount the X-axis gantry to the vertical extrusions, ensuring it moves smoothly without binding.
- Mount Print Head: Install the Sprite Direct Drive Extruder to the X-axis carriage and connect all cables.
- Install Build Plate: Place the magnetic PEI spring steel build plate onto the heated bed.
- Connect Electronics: Route all cables to the control box and connect power supply, stepper motors, and endstops.
- Level and Calibrate: Perform manual bed leveling followed by CR-Touch auto bed leveling procedure.
- Test Print: Load filament and run the included test print to verify proper operation.
Specifications
| Model Series | Ender-3 S1 Plus |
| Type | FDM/FFF 3D Printer |
| Build Volume | 300 x 300 x 300 mm |
| Layer Resolution | 0.05 - 0.4 mm |
| Print Speed | 60-150 mm/s (recommended) |
| Nozzle Temperature | Up to 300°C |
| Bed Temperature | Up to 110°C |
| Filament Diameter | 1.75 mm |
| Print Technology | Fused Deposition Modeling |
| Power Requirements | 110-240V, 50-60Hz, 350W |
| Dimensions (HxWxD) | 560 x 500 x 670 mm |
| Weight | 15.5 kg |
| File Transfer | USB, MicroSD Card, Wi-Fi (optional) |
Warranty Information
- Full Warranty: 1 year parts and labor
- Frame Warranty: Lifetime on aluminum extrusions
- Additional Coverage: Optional extended warranty available
For warranty service, contact Creality Customer Service at 1-800-555-3DPRINT or visit creality.com
Key Features
Sprite Direct Drive Extruder
All-metal direct drive extruder with dual-gear feeding system provides precise filament control, enabling printing with flexible materials and reducing stringing.
CR-Touch Auto Leveling
Automatic bed leveling sensor ensures perfect first layer adhesion across the entire 300x300mm build surface, eliminating manual leveling hassles.
Dual Z-Axis Lead Screws
Dual motor Z-axis system with trapezoidal lead screws provides exceptional stability and prevents gantry sag, ensuring consistent layer quality.
Carborundum Glass Bed
High-temperature resistant glass build plate with carborundum coating provides excellent adhesion when hot and easy release when cool.
Silent Motherboard
TMC2225 stepper drivers provide near-silent operation while maintaining precise motor control and smooth movement.
Resume Print Function
Power failure recovery feature allows prints to resume from the last layer after unexpected power interruptions.
Print Capabilities
PLA Printing
Optimal for detailed models with excellent dimensional accuracy
ABS/ASA
High-temperature materials for functional parts and outdoor use
TPU/Flexible
Flexible materials for gaskets, seals, and wearable items
PETG
Durable, chemical-resistant prints with good layer adhesion
Carbon Fiber
Reinforced filaments for high-strength, lightweight parts
Wood/PVA
Specialty filaments for support material and decorative prints
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Printer won't start | Power issue, mainboard fault | Check power supply, ensure proper voltage setting, check mainboard connections |
| Poor first layer adhesion | Bed not level, incorrect nozzle height, dirty build surface | Re-level bed, adjust Z-offset, clean build surface with isopropyl alcohol |
| Filament not extruding | Nozzle clog, extruder gear slipping, filament jam | Clean nozzle, check extruder tension, clear filament path |
| Layer shifting | Belt tension, loose pulleys, overheating drivers | Adjust belt tension, tighten pulley set screws, ensure proper cooling |
| Stringing/oozing | Temperature too high, retraction settings incorrect | Lower nozzle temperature, increase retraction distance/speed |
| Warping/corner lift | Bed temperature too low, draft, poor adhesion | Increase bed temperature, use enclosure, apply adhesive |
Error Codes
- E1: Heating failed - Check thermistor and heater cartridge
- E2: Bed heating failed - Check bed thermistor and heater
- E3: Thermal runaway - Check cooling and temperature sensors
- E4: ADC error - Check wiring and mainboard
- E5: Power loss - Check power supply and connections
- E6: Motor fault - Check stepper motor wiring and drivers
Manual Downloads
Current Model Manuals
Ender-3 S1 Plus
300x300x300mm Direct Drive
Ender-3 S1 Pro
220x220x270mm All-Metal
Ender-3 S1
220x220x270mm Direct Drive
Ender-3 V3 SE
220x220x250mm Auto Leveling
Popular Previous Models
Ender-3 V2
220x220x250mm Silent Board
Ender-3 Pro
220x220x250mm Meanwell PSU
Ender-3 Max
300x300x340mm Large Format
Ender-5 Plus
350x350x400mm CoreXY